ANALYSIS OF ALGORITHMS FOR BREAST BULGE DART DESIGN IN WOMEN'S TOP GARMENTS

Т. М. Мазур

Abstract


Development of algorithms for designing a bust prominence dart in the construction base (СВ) of the top garments through the construction methodologies using the Julivi CAD means. Methodology: usage of the possibilities provided by the CAD program “Design-development of the basic constructions” by Julivi to prepare basic constructions of the women’s top garments through designing of the separate node using the visual programming method following diff erent construction methodologies. Peculiarities of bust prominence dart design for the construction basis in the women’s top garment using the module “Design-development of basic constructions” by CAD Julivi were studied. Algorithms of bust prominence dart design following diff erent design methodologies for CB of the
women’s top garment in CAD Julivi program were provided. Sequence of bust prominence dart design (in accordance with two construction methodologies) using the instruments of visual programming is
presented in the form of a table and the description of the construction element building procedure recorded by the CAD Julivi was also provided. Parametric reproduction of the panel front was performed
to defi ne the construction quality of the separate element in the basic construction and the quality of schematic drawing areas matching for diff erent construction methodologies was illustrated. Algorithms
for more reasonable node building using the instruments from the module “Design-development of basic constructions” by CAD Julivi were off ered.
Scientifi c novelty: Created algorithm for reasonable execution of the separate construction mode in the women’s top garment using the CAD program instruments. Process sequence of the bust prominence
dart design following diff erent methodologies and using software instruments was analyzed. The practical signifi cance: developed methodological provisioning for the usage of the “Design-
development of basic constructions” module by CAD Julivi within the design of the construction sequence for the separate elements of the basic constructions of the women’s top garment and off ered algorithm s
for bust prominence dart design using CAD without the processes of the further shoulder cut matching.



DOI: https://doi.org/10.30857/2706-5898.2021.1.1

Refbacks

  • There are currently no refbacks.